How to setup Netgear or any Wireless Router

No replies
Title: NooBot
Joined: 06/11/2018
BotPoints: 75
User offline. Last seen 4 years 6 weeks ago.

Wireless networks are computer networks that are not connected by cables of any kind. The use of a wireless network enables enterprises to avoid the costly process of introducing cables into buildings or as a connection between different equipment locations. Modern communication relies heavily on Wireless Networking and it is, therefore, gaining popularity for Home and Business Networking. Wireless Networking offers the advantage of mobility and eliminates the use of cables. Computers at home or in a small office can easily be connected through Wireless Networking.

Set up Wireless Router Network
Setting up a secured network through a Netgear or any Router will keep your data free from spying and avert entry of any uninvited user into your network. You will have to follow certain guidelines to set up a Secured Wireless Network that will be provided either through Wireless Protected Array (WPA) or Wireless Encryption Protocol (WEP).

Connect to Modem
Power off your modem. Next connect one end of the Ethernet Cable to the ‘input’, marked at the back side of the router and another end to the modem. Now Power Modem back on.
Generally, it is a good rule to wait at least a minute before continuing to the next step.
Connect to Computer
Connect one end of a second Ethernet Cable to one of the available ports on the Router. Most modern Routers include four ports.
Power your Router
Plug your Router to a power source and wait till until your Router’s LED signals that it is connected to the internet. Generally, Routers have a green LED indicator that turns solid when connected.
Install Software and Drivers
If your Router included a disk to install Drivers, insert the disk and continue following the disks instructions to install Drivers and set up your Network.
If your Router does not include a disk continue to next steps.
Configure your Network
Take note of the Router’s IP address that is selected automatically (default) and mentioned in the user’s guide. Most Routers by default use, as the default IP address
Open your default web browser and type in the router’s address in the provided empty search field.
Insert a valid Username and Password. If you have not set one up and it requires one, the default for most brands of Routers is, Username: Admin, Password: Password.
You can also get to your Routers (Homepage) by going to Start Menu\Control Panel\Network and Sharing Center. Click the center icon at the top, which usually has the house as an icon if you saved your Network as a Home Network. On the next page under Network Infrastructure, you should see your Router listed. Just Right-Click your Router Icon and you should have a menu option to view Homepage.
Basic settings
Choose your Basic Settings such as Router Name, and IP Addressing
Wireless Security Settings
Locate Wireless Security or Wireless Settings. Choose a name(SSID) for your Network that you can easily identify and whether you wish to broadcast your Wireless Signal.
Select channel to broadcast on, by default a Router usually has this set to Auto which is fine for most users.
Select Wireless Mode. This is your speed for your wireless. Example: 54Mbps, 145Mbps, and 300Mbps.
For your Wireless Security settings, most modern Routers include the following types of security:
None – No security. Not recommended if you are in an area where someone who lives next door to you could use your Wireless Connection to connect to the Internet.
WEP – Older security encryption used for Wireless Networks with better options now available. This option does not give a password but a unique key that users enter to connect.
WPA-PSK[TKIP] – Better security than WEP and sometimes users still use this if they have issues with devices connecting. Still a great Security Option. There is a 54Mbps limit on this connection using Legacy G.
WPA2-PSK[AES] – Newer security using N support and if you have no issues with devices connecting this is the recommended Security Option as it gives you the best security.
WPA-PSK[TKIP]+WPA2-PSK[AES] – If you have issues with devices connecting you can use this setting as it gives you a combination of WPA and WPA2.
Another thing to note outside of setting up your Router is setting up Sharing for Computers and Devices connected to your Network. Windows 7 has come along way in making this easier for users and most users can do this by following the walk-through in Windows.

Follow our site for more stuff related to 192.168.l.l